Control Panel

An extinguishing release control panel indicating status of system giving you full control.
Local auto manual select and extinguishant release.
Optional status indicators are available which can be installed away from the protected area.
All panels are fully compliant with & tested to BS EN12094-1

Inert Gas

Environmentally friendly gas can be stored in protected area or stored remotely. Ideal for sensitive areas such as computer suites, leaving no residue or damage to protected area.

Inert systems have been developed as a viable and environmentally friendly alternative for Halon. Tested and approved by regulatory bodies throughout the world, Argonite is effective against fires involving almost all combustible materials and flammable liquids and is particularly suitable for use in areas where the use of water, foam, or powder would be unacceptable.

Applications:

Argonite systems are ideally suited to the protection of fixed equipment and plant. They are particularly applicable for high value risks where fires can have devastating consequences way beyond the cost of damage and lost production.

Chemical-based gases

Environmentally acceptable gas i.e. FM200 suitable for most applications, leaves no residue or damage. Stored at low pressure in protected area.

It has been universally accepted as the most suitable extinguishant to supersede Halon 1301. It gives superior extinguishing performance, is an environmentally friendly agent and is safe to use in manned areas. Stopping the fire in these critical first few seconds can save thousands of pounds worth of damage to equipment and consequent loss of production. Rapid fire knockdown within ten seconds.

Room Integrity Testing

Ensures the effectiveness of your extinguishing system, by testing the integrity if the room, i.e. preventing the extinguishant from escaping.

Integrity testing is a requirement of BS 14520 and should be carried out annually.